Meter stack installations and upgrades
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →South Pasadena is protected prewar housing with real design review, so exterior service equipment placement matters as much as capacity. Knob and tube is still out there behind the plaster.
Most of the city was built between 1890 and 1940, and it has stayed that way: Craftsman bungalows, Victorians near the Mission Street core, and 1920s revival homes on the slopes up toward Raymond Hill. The houses are generally well cared for cosmetically, which is part of the problem. Fresh paint and restored trim hide wiring that has been extended rather than replaced for a century, with knob and tube, cloth covered cable and modern circuits spliced together in the same attic.
Altos de Monterey, the 1960s hillside development within city limits, is the exception, with its own equipment issues, including panel brands insurers have stopped accepting. Older duplexes and small apartment buildings near Fair Oaks and the Metro station add meter and service work. In South Pasadena, typical calls come from new buyers whose insurer wants knob and tube removed, from owners planning a kitchen the existing service cannot support, and from people converting a gas house to all electric.
South Pasadena's prewar Craftsman and Victorian homes commonly hide knob and tube and cloth covered cable behind restored plaster and trim.
How we handle it →Electrifying an older South Pasadena house with heat pumps and induction cooking usually means moving off a 60 or 100 amp service.
How we handle it →The 1960s homes in Altos de Monterey carry panel brands from that era that insurers have stopped accepting.
How we handle it →Older duplexes and small apartment buildings near Fair Oaks have original meter equipment that needs replacing as loads grow.
How we handle it →Electrical work in South Pasadena is permitted through City of South Pasadena, and the service is energized by Southern California Edison. We handle the permit application, the plan check where one is required, the inspection scheduling and the utility coordination as part of the job.
The City of South Pasadena issues electrical permits, and Edison is the utility. Visible exterior changes, which can include a relocated meter, a new service mast or an exterior panel, may need design review before the permit is finalized, particularly on designated historic properties. We plan equipment placement with that review in mind from the first site visit, then follow the usual path of Edison disconnect, city inspection and reconnect.
Often, within limits. Edison has rules for meter access and where the service drop can attach, and code sets clearances, but there is usually some flexibility on side or rear walls. Moving the service also means moving the feeder to the panel, which affects cost. We propose a location that satisfies Edison and the city while keeping equipment off the front facade where possible.
Usually, if the house is still on a 60 or 100 amp service. A heat pump, induction range, heat pump water heater and an EV charger together typically call for 200 amps, though careful equipment choices and load management can sometimes fit less. We do a load calculation based on the exact equipment you plan to install before recommending anything.
Electrical permits in South Pasadena are issued by City of South Pasadena. Morff Electric handles the permit application, the plan check where one is required, and the inspection scheduling as part of the job.
South Pasadena is served by Southern California Edison. On a service upgrade or a meter stack the utility has to disconnect and reconnect the service, and Morff Electric coordinates that scheduling so the outage stays as short as possible.
91030
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Replace outdated or overloaded panels with safe, code compliant service.
Learn more →Safely remove outdated wiring still found in older homes, reducing fire risk.
Learn more →Upgrade your electrical system with new, code compliant wiring to improve safety.
Learn more →We handle all electrical permits, approvals and inspections with local utilities.
Comprehensive inspections to ensure your system is safe, efficient and ready.
Professional installation of electric vehicle chargers at your home, business or multi unit property.
Learn more →Clean, modern lighting solutions that brighten spaces while maintaining a sleek design.
Installation and replacement of outlets, switches and dimmers for convenience and safety.
Expert installation to improve air circulation, comfort and energy efficiency.
Safe and reliable electrical connections for kitchen range hoods.
From standard doorbells to smart systems, we install reliable entry alerts.
Properly wired exhaust fans to remove moisture and improve air quality.
Installation of security cameras, sensors and wiring to help keep your property safe.
Outdoor lighting solutions that highlight landscaping and improve curb appeal.
Installation, repair and LED upgrades for parking lots and exterior spaces.
Fast, accurate diagnosis and repair of electrical issues.
Tailored electrical system planning for new construction and renovations.
“Easy going guys very knowledgeable fast and walked me through permits.”
“He does good work! And he was on time! Very professional!”
“I would highly recommend them!”
Morff Electric covers 262 cities and neighborhoods across Los Angeles, Orange and Ventura counties, the Antelope Valley and the western Inland Empire. See the full service area.
No call center, no upsell script. We read every request that comes in and get back to you the same business day.