Meter stack installations and upgrades
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Alhambra has a deep stock of 1920s and 1930s bungalows alongside dense newer apartment construction. The older homes need rewiring, the newer buildings need proper metering, and both need the city permit process handled.
Most of the residential grid filled in between the 1910s and the early 1940s, so a typical street has Spanish Revival cottages, small Craftsman bungalows and period duplexes on narrow lots with detached rear garages. Many of those garages were later converted or rebuilt, and power to them often runs through old buried conduit or an overhead line strung from the house. On the main houses we find two wire branch circuits with no ground, fuse boxes swapped decades ago for cheap breaker panels, and service masts pulling loose from the roofline.
The other big piece of Alhambra's housing is the multifamily built from the 1960s onward along Garfield, Atlantic and the side streets: stucco walk-ups, tuck-under parking buildings and newer condo projects. Owners of those buildings call about meter centers that are rusting, laundry and common area circuits, and tenants asking for EV charging in shared garages. Postwar infill homes scattered through town add a steady layer of 1950s and 1960s panel replacements, often prompted by a refinance or a new insurance carrier.
Alhambra's 1920s and 1930s bungalows and period duplexes commonly still run ungrounded two wire circuits, often extended out to converted rear garages.
How we handle it →Walk-ups and tuck-under apartment buildings along Garfield and Atlantic have aging meter centers with little capacity left for tenant chargers or added units.
How we handle it →Postwar homes scattered through Alhambra still carry 1950s and 1960s panel brands that carriers flag at renewal or during a refinance.
How we handle it →Shared garages in Alhambra condo and apartment buildings need load planning before chargers can be added without overloading the building service.
How we handle it →Electrical work in Alhambra is permitted through City of Alhambra, and the service is energized by Southern California Edison. We handle the permit application, the plan check where one is required, the inspection scheduling and the utility coordination as part of the job.
Electrical permits in Alhambra are issued by the city, and Southern California Edison owns everything up to the meter. On a duplex or apartment building, the city inspector looks at the whole service, including grounding and the meter center, so we survey it before applying. After permit issue, Edison schedules the disconnect, we replace the equipment, the city inspects, and Edison restores power. Tenants get written notice of the outage window from the owner or manager.
Often yes. The typical fix is a new feeder from the main panel to a small subpanel in the converted garage, replacing whatever extension of a house circuit fed it before. If the main service is too small to add the feeder, an upgrade comes first. We check the existing conduit and route, since old buried lines in Alhambra backyards are frequently damaged or undersized.
Usually, as long as both units are recognized by the city. The work means a two position meter panel at the service, separate panels for each unit, and splitting any circuits that currently cross between them, which is common in older Alhambra duplexes. Edison then sets two meters and each tenant pays their own bill. We trace every circuit before quoting.
Electrical permits in Alhambra are issued by City of Alhambra. Morff Electric handles the permit application, the plan check where one is required, and the inspection scheduling as part of the job.
Alhambra is served by Southern California Edison. On a service upgrade or a meter stack the utility has to disconnect and reconnect the service, and Morff Electric coordinates that scheduling so the outage stays as short as possible.
91801, 91803, 91804
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Replace outdated or overloaded panels with safe, code compliant service.
Learn more →Safely remove outdated wiring still found in older homes, reducing fire risk.
Learn more →Upgrade your electrical system with new, code compliant wiring to improve safety.
Learn more →We handle all electrical permits, approvals and inspections with local utilities.
Comprehensive inspections to ensure your system is safe, efficient and ready.
Professional installation of electric vehicle chargers at your home, business or multi unit property.
Learn more →Clean, modern lighting solutions that brighten spaces while maintaining a sleek design.
Installation and replacement of outlets, switches and dimmers for convenience and safety.
Expert installation to improve air circulation, comfort and energy efficiency.
Safe and reliable electrical connections for kitchen range hoods.
From standard doorbells to smart systems, we install reliable entry alerts.
Properly wired exhaust fans to remove moisture and improve air quality.
Installation of security cameras, sensors and wiring to help keep your property safe.
Outdoor lighting solutions that highlight landscaping and improve curb appeal.
Installation, repair and LED upgrades for parking lots and exterior spaces.
Fast, accurate diagnosis and repair of electrical issues.
Tailored electrical system planning for new construction and renovations.
“Easy going guys very knowledgeable fast and walked me through permits.”
“He does good work! And he was on time! Very professional!”
“I would highly recommend them!”
Morff Electric covers 262 cities and neighborhoods across Los Angeles, Orange and Ventura counties, the Antelope Valley and the western Inland Empire. See the full service area.
No call center, no upsell script. We read every request that comes in and get back to you the same business day.