Meter stack installations and upgrades
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Sherman Oaks has a lot of hillside homes from the 1940s through the 1960s with additions layered on over the decades, which is exactly how you end up with three subpanels and no clear load calculation. Remodels here almost always trigger a service upgrade.
Sherman Oaks was founded in 1927, and the community still splits along Ventura Boulevard. South of it, homes climb into the Santa Monica Mountains on steep lots with garages at the street and living space below. North of it, the flats hold 1940s and 1950s houses, pockets like Chandler Estates and Magnolia Woods, and a long band of apartment and condo buildings near the 101 and 405. Close to six in ten households rent, so multi-unit work is a real part of the picture here, not just hillside houses.
Hillside lots bring their own problems. The meter and main are often at street level while the house steps down the slope, so feeders run long distances through crawlspaces or along retaining walls, and earlier owners did not always protect them well. In the flats, the calls are about older Zinsco and Federal Pacific panels, kitchen remodels and EV chargers. Condo associations near Ventura ask how to add shared charging without overloading the building. Pool pumps and spa heaters show up on both sides of the boulevard.
Kitchen additions, second AC systems and pool equipment in Sherman Oaks homes regularly exceed services that were sized in the 1950s.
How we handle it →Hillside Sherman Oaks houses with decades of additions often have mixed wiring generations and unlabeled subpanels worth consolidating during a remodel.
How we handle it →Condo buildings and homes with street level garages in Sherman Oaks need charger circuits planned around long runs and shared building services.
How we handle it →Flats north of Ventura in Sherman Oaks have many 1950s and 1960s homes with Zinsco or Federal Pacific panels that insurers flag.
How we handle it →Electrical work in Sherman Oaks is permitted through LA Dept of Building and Safety, and the service is energized by LADWP. We handle the permit application, the plan check where one is required, the inspection scheduling and the utility coordination as part of the job.
Sherman Oaks is in the City of Los Angeles, so we pull permits through LADBS and coordinate the service with LADWP. On a hillside lot the inspector looks closely at long feeders, grounding and how conductors are protected along the slope. The job moves from permit to LADWP disconnect, then new service and feeder work, LADBS inspection and LADWP reconnect. Some hillside streets have tight access for utility trucks, so we plan the cutover date with LADWP and the neighbors in mind.
It adds design work. The feeder from the meter to the house panel has to be sized for distance so voltage drop stays in check, and it has to be protected where it runs down the slope or under decks. Sometimes the best answer is a new main at the street with a larger feeder. Sometimes it is relocating the service closer to the house with LADWP's approval. We price both before you decide.
Start with the building's service and house meter capacity. We do a load study, then look at options like load managed chargers that share capacity, a new dedicated meter for parking, or individual chargers tied to each owner's unit meter. California law gives condo owners the right to install chargers under reasonable association rules, so having a building plan in place makes those requests easier to approve.
Electrical permits in Sherman Oaks are issued by LA Dept of Building and Safety. Morff Electric handles the permit application, the plan check where one is required, and the inspection scheduling as part of the job.
Sherman Oaks is served by LADWP. On a service upgrade or a meter stack the utility has to disconnect and reconnect the service, and Morff Electric coordinates that scheduling so the outage stays as short as possible.
91403, 91423
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Replace outdated or overloaded panels with safe, code compliant service.
Learn more →Safely remove outdated wiring still found in older homes, reducing fire risk.
Learn more →Upgrade your electrical system with new, code compliant wiring to improve safety.
Learn more →We handle all electrical permits, approvals and inspections with local utilities.
Comprehensive inspections to ensure your system is safe, efficient and ready.
Professional installation of electric vehicle chargers at your home, business or multi unit property.
Learn more →Clean, modern lighting solutions that brighten spaces while maintaining a sleek design.
Installation and replacement of outlets, switches and dimmers for convenience and safety.
Expert installation to improve air circulation, comfort and energy efficiency.
Safe and reliable electrical connections for kitchen range hoods.
From standard doorbells to smart systems, we install reliable entry alerts.
Properly wired exhaust fans to remove moisture and improve air quality.
Installation of security cameras, sensors and wiring to help keep your property safe.
Outdoor lighting solutions that highlight landscaping and improve curb appeal.
Installation, repair and LED upgrades for parking lots and exterior spaces.
Fast, accurate diagnosis and repair of electrical issues.
Tailored electrical system planning for new construction and renovations.
“Easy going guys very knowledgeable fast and walked me through permits.”
“He does good work! And he was on time! Very professional!”
“I would highly recommend them!”
Morff Electric covers 262 cities and neighborhoods across Los Angeles, Orange and Ventura counties, the Antelope Valley and the western Inland Empire. See the full service area.
No call center, no upsell script. We read every request that comes in and get back to you the same business day.