Meter stack installations and upgrades
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →West Los Angeles is dense postwar apartment buildings mixed with older single family homes. Meter stack replacement and in unit subpanels are the core of the multi family work here.
Most of the housing between the 405 and the Santa Monica border went up after World War II. Small single family homes from the 1920s through the 1940s survive on some blocks, but the dominant building is the two or three story apartment from the 1950s and 1960s, often with parking underneath and units stacked above. Newer five and six story mixed use buildings have been going up along Santa Monica, Olympic and Pico boulevards in the last two decades.
That postwar apartment stock defines most of the calls. Owners deal with fused disconnects, unit panels rated well below what tenants now use, and meter sockets corroded from decades of use. Many buildings had AC units added through the walls without anyone revisiting the service. The single family homes here call about undersized 60 and 100 amp services, and newer buildings ask about adding chargers to garages that were not wired for them.
Postwar West Los Angeles apartment buildings commonly sit on original meter banks that cannot carry today's unit loads.
How we handle it →1950s and 1960s West LA apartments frequently have Zinsco or Federal Pacific unit panels that insurers flag at renewal.
How we handle it →Small West Los Angeles houses still on 60 and 100 amp services cannot add AC, an ADU or an EV charger without an upgrade.
How we handle it →Newer mixed use buildings along Olympic and Pico are fielding tenant requests for charging in garages built without it.
How we handle it →Electrical work in West Los Angeles is permitted through LA Dept of Building and Safety, and the service is energized by LADWP. We handle the permit application, the plan check where one is required, the inspection scheduling and the utility coordination as part of the job.
West Los Angeles is inside the City of Los Angeles, so LADBS issues permits and LADWP supplies power. A typical apartment service upgrade involves an LADBS permit, LADWP approval of the new meter arrangement, a scheduled LADWP outage for the building, installation, and LADBS inspection. Once LADBS releases the job, LADWP reconnects. Tenants need proper notice of the outage, and we help owners plan the schedule around it.
The building is typically down for most of a working day while the old meter bank comes out and the new one goes in. The exact length depends on the building and on LADWP's schedule for the disconnect and reconnect. We prepare as much as possible in advance so the outage covers only the cutover, and we give you dates you can send tenants.
Only if the service and unit panels can carry them. Many 1950s buildings here have 30 or 40 amp unit panels and a main service sized for lights and a refrigerator. We run a load calculation for the whole building with the AC added. If it fails, the answer is usually new unit panels and feeders and often a larger service.
Electrical permits in West Los Angeles are issued by LA Dept of Building and Safety. Morff Electric handles the permit application, the plan check where one is required, and the inspection scheduling as part of the job.
West Los Angeles is served by LADWP. On a service upgrade or a meter stack the utility has to disconnect and reconnect the service, and Morff Electric coordinates that scheduling so the outage stays as short as possible.
90025, 90064
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Replace outdated or overloaded panels with safe, code compliant service.
Learn more →Safely remove outdated wiring still found in older homes, reducing fire risk.
Learn more →Upgrade your electrical system with new, code compliant wiring to improve safety.
Learn more →We handle all electrical permits, approvals and inspections with local utilities.
Comprehensive inspections to ensure your system is safe, efficient and ready.
Professional installation of electric vehicle chargers at your home, business or multi unit property.
Learn more →Clean, modern lighting solutions that brighten spaces while maintaining a sleek design.
Installation and replacement of outlets, switches and dimmers for convenience and safety.
Expert installation to improve air circulation, comfort and energy efficiency.
Safe and reliable electrical connections for kitchen range hoods.
From standard doorbells to smart systems, we install reliable entry alerts.
Properly wired exhaust fans to remove moisture and improve air quality.
Installation of security cameras, sensors and wiring to help keep your property safe.
Outdoor lighting solutions that highlight landscaping and improve curb appeal.
Installation, repair and LED upgrades for parking lots and exterior spaces.
Fast, accurate diagnosis and repair of electrical issues.
Tailored electrical system planning for new construction and renovations.
“Easy going guys very knowledgeable fast and walked me through permits.”
“He does good work! And he was on time! Very professional!”
“I would highly recommend them!”
Morff Electric covers 262 cities and neighborhoods across Los Angeles, Orange and Ventura counties, the Antelope Valley and the western Inland Empire. See the full service area.
No call center, no upsell script. We read every request that comes in and get back to you the same business day.