Meter stack installations and upgrades
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Maywood is very dense older housing on small lots with a high share of added rear units. Getting the metering right is usually the whole permit conversation.
Maywood covers only a little over a square mile, and almost every residential lot in it has been built out. Most homes date from the 1920s through the 1940s, small bungalows and Spanish style houses that were later joined by rear units, converted garages and small apartment buildings. Original services in these properties were small, often 30 to 60 amps on a fuse panel, and many have been upgraded once but not since the households on the lot multiplied.
Because the lots are small and full, there is rarely room to relocate equipment, so planning where a new meter bank or panel will go is part of every job. Owners here typically call when they are trying to get a property permitted, when a unit has no separate meter and tenants share a bill, or when an older panel needs replacing for insurance. Rewiring the oldest homes is also common, particularly ahead of a sale.
Maywood lots with added rear units usually need a small meter bank so each household is legally metered with its own panel.
How we handle it →Maywood's 1920s to 1940s bungalows often still carry original wiring that was never designed for today's appliances or multiple households.
How we handle it →Small original services in Maywood homes, even after one upgrade, rarely cover a second household plus air conditioning.
How we handle it →Electrical work in Maywood is permitted through City of Maywood, and the service is energized by Southern California Edison. We handle the permit application, the plan check where one is required, the inspection scheduling and the utility coordination as part of the job.
Maywood issues electrical permits through the city. On a crowded lot the meter location tends to decide the design, because Edison requires clear working space and access in front of the meters before it approves anything. After Edison approves the spot, we get the city permit, power goes off for the changeover, and it stays off until the inspector clears the work for Edison. We measure clearances on the first visit so the plan holds up through inspection.
It has to go where Edison can reach it and where there is clear working space in front of it. On small lots that is often the front or side of the main house, near the existing service. We measure the clearances, check where the utility line enters and propose a location that Edison will accept before anything is ordered.
Not always by law, but buyers' lenders and insurers often require it, and many buyers will ask for a credit. A fuse box also limits what the new owner can add. Replacing it with a breaker panel and a properly sized service usually makes the sale smoother and removes the question from the inspection report.
Electrical permits in Maywood are issued by City of Maywood. Morff Electric handles the permit application, the plan check where one is required, and the inspection scheduling as part of the job.
Maywood is served by Southern California Edison. On a service upgrade or a meter stack the utility has to disconnect and reconnect the service, and Morff Electric coordinates that scheduling so the outage stays as short as possible.
90270
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Replace outdated or overloaded panels with safe, code compliant service.
Learn more →Safely remove outdated wiring still found in older homes, reducing fire risk.
Learn more →Upgrade your electrical system with new, code compliant wiring to improve safety.
Learn more →We handle all electrical permits, approvals and inspections with local utilities.
Comprehensive inspections to ensure your system is safe, efficient and ready.
Professional installation of electric vehicle chargers at your home, business or multi unit property.
Learn more →Clean, modern lighting solutions that brighten spaces while maintaining a sleek design.
Installation and replacement of outlets, switches and dimmers for convenience and safety.
Expert installation to improve air circulation, comfort and energy efficiency.
Safe and reliable electrical connections for kitchen range hoods.
From standard doorbells to smart systems, we install reliable entry alerts.
Properly wired exhaust fans to remove moisture and improve air quality.
Installation of security cameras, sensors and wiring to help keep your property safe.
Outdoor lighting solutions that highlight landscaping and improve curb appeal.
Installation, repair and LED upgrades for parking lots and exterior spaces.
Fast, accurate diagnosis and repair of electrical issues.
Tailored electrical system planning for new construction and renovations.
“Easy going guys very knowledgeable fast and walked me through permits.”
“He does good work! And he was on time! Very professional!”
“I would highly recommend them!”
Morff Electric covers 262 cities and neighborhoods across Los Angeles, Orange and Ventura counties, the Antelope Valley and the western Inland Empire. See the full service area.
No call center, no upsell script. We read every request that comes in and get back to you the same business day.