Meter stack installations and upgrades
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →El Monte has a large stock of older single family homes and small multi unit properties, many with additions that were never permitted. Bringing a property back into code compliance is a common starting point before any upgrade.
El Monte grew from a farming town into a dense residential city after World War II, and much of its housing is small 1940s and 1950s single family homes on lots that now carry a second or third structure. Garages became bedrooms, rear houses went up, and power was extended out to them with whatever was at hand. Typical findings are a 60 or 100 amp service feeding three buildings, cord style wiring run through walls, and old fuse boxes still in service behind newer additions.
The city also has a large inventory of small apartment buildings and courts, often four to twelve units, built from the 1950s through the 1970s with meter banks that are now rusted or full. Even in quieter single family areas such as Arden Village, 1950s and 1960s panels are the norm. Most calls come from owners refinancing or selling who were told to clean up the electrical, from landlords whose insurer flagged a panel brand, or from families adding a legal ADU.
El Monte's four to twelve unit apartment buildings and courts from the 1950s through the 1970s often have rusted or full meter banks.
How we handle it →One small original service commonly feeds the main house, a converted garage and a rear unit on the same El Monte lot.
How we handle it →Postwar El Monte homes still run 1950s and 1960s panels that lenders and insurers flag during refinances, sales and policy renewals.
How we handle it →Unpermitted additions here are frequently wired with extended circuits and hidden splices that have to be replaced before the city will sign off.
How we handle it →Electrical work in El Monte is permitted through City of El Monte, and the service is energized by Southern California Edison. We handle the permit application, the plan check where one is required, the inspection scheduling and the utility coordination as part of the job.
Work here is permitted through the City of El Monte, and Edison controls the service. When an addition on the property was built without a permit, the city may want it addressed before it signs off on new electrical work tied to the same structure, so we look at permit history first. With the permit in hand, we book the Edison outage, change out the equipment, pass the city inspection and get the power back on. On multi unit buildings, tenant notice for the outage is part of our plan.
If the rear house is permitted as a separate dwelling, generally yes. Edison will set a second meter once the city approves it, which usually means a new meter base or a dual meter panel at the main service and a feeder out to the rear unit. If the back house was never permitted, legalizing it comes first. A site visit tells us which path fits your lot.
It can be. Buyers' inspectors almost always call out fuse boxes, and many insurers will not write a new policy on one. The fuses are not illegal on their own, but the panel is usually undersized and often overfused, with larger fuses installed than the wiring can safely carry. Replacing it with a modern breaker panel and a correctly sized service is a common pre-listing job.
Electrical permits in El Monte are issued by City of El Monte. Morff Electric handles the permit application, the plan check where one is required, and the inspection scheduling as part of the job.
El Monte is served by Southern California Edison. On a service upgrade or a meter stack the utility has to disconnect and reconnect the service, and Morff Electric coordinates that scheduling so the outage stays as short as possible.
91731, 91732, 91733
Modern, space saving solutions for multi unit properties that allow individual metering.
Learn more →Replace outdated or overloaded panels with safe, code compliant service.
Learn more →Safely remove outdated wiring still found in older homes, reducing fire risk.
Learn more →Upgrade your electrical system with new, code compliant wiring to improve safety.
Learn more →We handle all electrical permits, approvals and inspections with local utilities.
Comprehensive inspections to ensure your system is safe, efficient and ready.
Professional installation of electric vehicle chargers at your home, business or multi unit property.
Learn more →Clean, modern lighting solutions that brighten spaces while maintaining a sleek design.
Installation and replacement of outlets, switches and dimmers for convenience and safety.
Expert installation to improve air circulation, comfort and energy efficiency.
Safe and reliable electrical connections for kitchen range hoods.
From standard doorbells to smart systems, we install reliable entry alerts.
Properly wired exhaust fans to remove moisture and improve air quality.
Installation of security cameras, sensors and wiring to help keep your property safe.
Outdoor lighting solutions that highlight landscaping and improve curb appeal.
Installation, repair and LED upgrades for parking lots and exterior spaces.
Fast, accurate diagnosis and repair of electrical issues.
Tailored electrical system planning for new construction and renovations.
“Easy going guys very knowledgeable fast and walked me through permits.”
“He does good work! And he was on time! Very professional!”
“I would highly recommend them!”
Morff Electric covers 262 cities and neighborhoods across Los Angeles, Orange and Ventura counties, the Antelope Valley and the western Inland Empire. See the full service area.
No call center, no upsell script. We read every request that comes in and get back to you the same business day.